Nixie Pipe – Modern Day LED Nixie Tube

Nixie Pipe is my interpretation of a modern day Nixie Tube – the cold-cathode vacuum gas-filled tubes from the 1960s.

The project came about when I decided to make a clock for my kitchen, with specific requirement for an egg timer function! I’ve always wanted to make a Nixie Tube clock but having completed a Nixie Tube project recently and one pipe failing after around 6,000 hours, I wanted to come up this something better. Something that didn’t require high voltages, special driving circuitry, could be easily interfaced and was modular, but which maintained the unique visual depth of a Nixie Tube. Continue reading Nixie Pipe – Modern Day LED Nixie Tube

Wooden Bits – Binary Clock

Wooden Bits Gif

I’ve been meaning to make a binary wall clock for a while and to also try out kerf bending with the laser cutter. What put me off creating kerf bends before I found OpenSCAD, was the manual creation of all the lines in the right places. It’s the kind of repetitive, uniform task computers were made to do.

Continue reading Wooden Bits – Binary Clock