Categories
Fabrication Mechanical

Samsung Frame TV Oak Tripod Stand

Being part of a generation that doesn’t watch TV…except documentaries and films…and YouTube…as well, might as well watch it on a big screen. Got a TV, a Samsung Frame – designed to look like a picture frame. It can mount flush to a wall or be mounted on an easel inspired stand, which Samsung sell separately […]

Categories
Electronics Fabrication Mechanical

Whitterm-220 Clever Serial Terminal

21/12/18 UPDATE: Hello to Hack a Day readers. This project was shared when I did it but re-posted recently. It is 2.5 years old and there are many things I would do differently. I am considering work on a IO board specific to the project (RS232 driver, GPIO break-out, proper RX/TX LED buffers and potentially […]

Categories
Fabrication

Bike Frame Wall Mount

Categories
Electronics Fabrication Mechanical Programming

Wooden Bits – Binary Clock

I’ve been meaning to make a binary wall clock for a while and to also try out kerf bending with the laser cutter. What put me off creating kerf bends before I found OpenSCAD, was the manual creation of all the lines in the right places. It’s the kind of repetitive, uniform task computers were […]

Categories
Fabrication Mechanical Programming

Laser Cut Adaptable Wire Dispenser in OpenSCAD

I wanted a wire dispenser that wasn’t fixed in place so I could move it to where I was working. To my surprise, such a thing doesn’t exist (I couldn’t seem to find fixed ones either, other than using a kitchen towel rail). Keen to put my new found love for OpenSCAD to use, I […]

Categories
Fabrication Mechanical

Laser Cut iPhone 5s Dock

Categories
Electronics Fabrication Mechanical Modification

SoundBar VU Meter Laminated Wooden Speaker

I felt that the battery powered Bluetooth speaker I made could be improved with more colour! Taking a leaf from the VU meters on amplifiers of the 80s, I decided it would be neat to sandwich clear acrylic between the plywood layers, each with an integrated LED that would form a full body amplitude meter. […]

Categories
Fabrication Mechanical Modification

Bike Hub Pencil Holder

Categories
Fabrication

Bristol Butt’r Point of Sale

Categories
Fabrication Mechanical

Laser Cut Battery Powered Bluetooth Speaker

I wanted to create a special birthday present for my girlfriend, whom had no speaker system. I decided a battery powered Bluetooth speaker would be neat, and having just learnt use of the laser cutter I came up with a layered design. The internals consist of a 2x15W RMS digital amp, 2x15W 80 cones, a […]